Results 1 to 3 of 3

Thread: Specifikations '98 - '03

  1. #1
    Löschenkohl
    Guest

    Specifikations '98 - '03

    These are the maintenance facts of your Tuono - if it's an 1998 - 2003

    Engine

    Engine idle speed............................................. ............ 1250 +/- 100 rpm
    Spark plugs type........................................ NGK DCPR9E or NGK DCPR9EVX
    Electrode gap............................................... .....................0,6 to 0,7mm
    Valve clearance (cold engine) intake.......................................0,12 to 0,17
    Valve clearance (cold engine) exhaust.....................................0,23 to 0,28
    Cylinder compression.................................180 to 150 psi not below 120 psi

    Miscellaneous

    Drive chain slack.....................................25mm with bike on auxiliary stand
    Throttle twistgrip freepl............................................ ................2 to 3mm
    Fast idle lever freeplay.......................................... ...................2 to 3mm

    Recommenden lubricants and fluids

    Engine/transmission oil type......................................API grade SG motoroil
    Engine/transmission oil viscosity......................................... .....SAE 15W50
    Engine/transmission oil capacity.................3,9l incl filter change 3,7l without
    Coolant type........................................50% destilled water 50% antifreeze
    Coolant capacity (total)........................................... .............approx. 2,5l
    Brake and clutch fluid...............................DOT 5.1 NOT DOT 5 Silicone fluid
    Drive chain...................................Chain lubricantssuitable for O-ring chains
    Steering and headbearings...................................... ...Multi-purpose grease
    Swingarm pivot bearings.......................................... ..Multi-purpose grease
    Suspension linkage bearings.......................................Mul ti-purpose grease
    Bearing sel lips.............................................. ...........Multi-purpose grease
    Gearchange lever/footrest, rear brake pedal..................Multi-purpose grease
    Brake and clutch lever pivots............................................ ........engine oil Sidestand pivot............................................. ..........Multi-purpose grease
    Throttle grip.............................................. .............................engine oil
    Front brake lever piston tip............................................... .silicone grease
    Cables............................................ ...............engine oil or cable lubricant

    Torque settings

    Coolant drain bolts
    Water pump drain bolt.............................................. ..................12Nm
    Radiator drain bolts............................................. .......................10Nm
    Engine oil drain bolts
    Engine drain bolt.............................................. ..........................12Nm
    Oil tank drain bolt.............................................. ........................15Nm
    Handlebar position bolts............................................. ....................11Nm
    Handlebar clamp bolts............................................. .......................25Nm
    Intake duct bolts............................................. .............................19Nm
    Oil filter cover bolts............................................. ..........................11Nm
    Oil tank strainer.......................................... ..................................30Nm
    Rear axle nut............................................... .....................90 tom100Nm
    Spark plugs............................................. ....................................20Nm
    Steeraing head bearing adjuster.......................................... ............40Nm
    Steering stem nut
    1998 to 2000 with plain nut............................................... ..........80Nm
    2001 to 2003 with drilled nut............................................... .......100Nm
    Top yoke fork clamp bolts............................................. .................25Nm


    These are the informations provided by the Haynes manual. Definitly a "Nice to know"

  2. #2
    Baby Twin BugKiller's Avatar
    Join Date
    Apr 2009
    Location
    Northern California
    Posts
    2
    Hi there,
    New around here!

    I have an 04 Factory, I just got it a week ago. I think it could run better. Is there anyone out there that has a Good Power Commander IIIusb MAP for an 04' with a single Akrapovic slipon muffler, highflow air cleaner?..... thanks

  3. #3
    Evil Twin england 2's Avatar
    Join Date
    Jul 2008
    Location
    U.K.
    Posts
    494
    Thanks Loschenkohl, very nice to just click to see

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


SEO by vBSEO 3.6.1